CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 213)

Video Analysis
195
3
3.19 Advanced Unattended Object Detection
Compared to Unattended Object Detection that can only be applied in the indoors, the advanced
version of Unattended Object Detection can be applied in the outdoors. The Advanced Unattended
Object Detection can generate an alert when any unattended object stays within the camera view.
Note:
1. This function is only available when an AVP dongle is used. Up to 16 cameras can be configured
for this application.
2. It is highly recommended not to use Advanced Unattended Object Detection and Unattended
Object Detection together.
1. Click the Configure button (No. 14, Figure 1-2), click Advanced Video Analysis, and select
Advanced Unattended Object Detection Setting.
2. Select the desired camera(s) to be configured, and click Configure. This dialog box appears.
Figure 3-53
3. Select a camera from the Camera Selection drop-down list.
4. If necessary, use the Mask Region function to mask off the area on the camera view where
motion will be ignored.