CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 365)

Point-of-Sale (POS) Application
347
7
3. To trigger an alarm when the defined text is detected during the transaction, click the Loss
Prevention Setting button in the POS Capture Data Setting dialog box (Figure 7-15). This dialog
box appears.
Figure 7-25
„ Enable Alarm: Check this item to enable the alarm when the identified text is detected. To set
up alarm frequency conditions, click the Advanced button. For details , see Setting Alarm
Frequency earlier in this chapter.
„ Alarm Output: Check this item and use the drop-down lists to select the connected module
and output device.
„ Alert Message: Type the message for the E-mail or SMS alerts to be sent out when the alarm
is triggered.
4. Click OK to save the above settings.