CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 574)

556
11.8.3 Adding a Disk Drive
1. Click Windows Start, point to Programs, select the GV folder and select Hot Swap HDD Tool.
2. Insert a hot-swap hard drive or plug a portable hard drive to your computer. This dialog box
appears.
Figure 11-44
3. Select
Add to recording path and select the storage group from the drop-down list.
4. If there are recording files saved on the hard drive, you may select the options of Delete all
events, Delete all database files or Delete all object index files.
5. Click OK to automatically configure the hard drive to the recording path.
6. To verify the hard drive is added successfully, check if the “Status” of the drive displays Standby.
Or in the Main System, click the Configure button, point to System Configure, select General
Setting, click the Set Location button, and then select the Storage Group Folder to confirm the
new recording path.
Tip: To add a local drive to the recording path, right-click the desired drive, select Add for recording
and follow Step 3 to add the drive.