CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 559)

Useful Utilities
541
11
11.6.6 Connecting GV-System to the Server
To configure the GV-System in order to access the Authentication Server remotely through a network
connection, follow these steps:
1. Click
the Configure button (No. 14, Figure 1-2), point to System Configure, select Password
Setup, and then select Remote Authentication Setup. This dialog box appears.
Figure 11-31
„ Enable Remote Authentication: Enable the connection with the Authentication Server.
„ Allow local supervisors to disable Remote Authentication System: Allows the local
supervisor to stop the Authentication application when the connection with the Authentication
Server fails. Note if the option is disabled and the connection with the Authentication Server
fails, the local supervisor will not be able to log into the GV-System and the dialog box won’t
be accessible until connection resumes.
„ Allow users to use local account to log in remote applications: Allows the local users to
access other remote applications with their previous password and ID settings when the
connection with the Authentication Server fails.