CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 103)

Configuring Main System
85
1
After the PTZ cameras are added to the system, you should now see the PTZ Control button
on the screen. Click the button to bring out the on-screen control panel, shown as follows:
Pan/Tilt Control
Zoom Control
Focus Control
Preset Switch Panel
Option
Close
PTZ Switch
Iris Control
Figure 1-70
„ PTZ Switch: Changes the PTZ model to be controlled.
„ Close: Closes the control panel.
„ Pan/Tilt Control: Allows the PTZ to pan and tilt to any angle.
„ Zoom Control: Allows the PTZ to zoom in or out.
„ Focus Control: Adjusts the camera focus.
„ Iris Control: Adjusts the camera iris. The iris control buttons are only available for GV-IP
Speed Dome.
„ Option: Moves the PTZ to a preset point by clicking the preset number. Functions included in
the Option may be different in terms of PTZ models. Consult the manual of the connected
PTZ model.
„ Preset Switch Panel: You can also enter a preset number using the onscreen keypad
displayed.
For the supported PTZ models, see Appendix B.