3 audio and video settings, 1 setting video source and resolution, 3 audio – CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System User Manual
Page 50: Video settings
32
1.3 Audio and Video Settings
1.3.1 Setting Video Source and Resolution
Video Source sets the video standard of your system: NTSC or PAL. Click the Configure button
(No.14, Figure 1-2), select A/V Setting, and select Video Source to display the following dialog box.
Figure 1-21
Video Standard: Select a video standard used in your country.
Video Resolution: Consider your priority in image quality or CPU usage before making a
selection.
z
For NTSC, the image quality and CPU usage from the highest to the lowest is: 704 x 480,
704 x 480 De-interlace, 640 x 480, 640 x 480 De-interlace, 352 x 240, 320 x 240.
z
For PAL, the image quality and CPU usage from the highest to the lowest is: 704 x 576,
704 x 576 De-interlace, 640 x 480, 640 x 480 De-interlace, 352 x 288, 320 x 240.
To change the resolution of individual analog cameras, refer to Resolution Button in Adjusting
Individual Camera earlier in this chapter.