CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 393)

Remote Viewing
375
8
8.3.4 Alarm Notification
The Single View Viewer can be set to display up to four captured images in the control panel upon
motion detection or input trigger. To enable the function, follow these steps.
Figure 8-21
1. Click
the Show System Menu button (No. 5, Figure 8-19), and select Alarm Notify. This dialog
box appears.
Figure 8-22 Alarm Notification
„ Motion Notify: Once motion is detected, the captured images are displayed in the control
panel of the Single View.
„ I/O Alarm Notify: Once the input device is triggered, the captured images are displayed in the
control panel of the Single View.
„ Alert Sound: Activates the computer noise alarm on motion and input-triggered detection.
„ Auto Snapshot: The program will take a snapshot every 5 seconds on motion and
input-triggered detection.
„ File Path: Assigns a path to save the snapshots.
2. Click OK to apply the above settings.
Captured images Pop-up live video