CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System User Manual
Page 415
Remote Viewing
397
8
5. Click
the
Edit tab. This dialog box appears.
Figure 8-39 Camera Setting
6. Select the device type of the host.
7. Enter the IP address, username and password to log into the host.
8. In
the
Camera No. drop-down list, select one desired camera channel from the host.
9. Keep the port settings as defaults; otherwise modify them if necessary.
10. Click OK.
Quick Creation of Multiple Hosts
1. Click on a desired monitoring window, which will be highlighted in the red frame.
2. Click and drag a camera from the Host List to the monitoring window. The selected camera then is
displayed.
3. Repeat the step 1 and 2 to configure other monitoring windows for different cameras.
4. Click
the
Save Camera to Multiple Host button (No. 28, Figure 8-34) to create the Multiple Hosts.