CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 469)

Remote Viewing
451
8
Other Functions
After you enlarge one channel, you can find the following buttons for control.
Figure 8-89
Button Name Function
Enable Record Activates recording controls.
Record One Channel The button is available when you press the Enable
Record button. Starts / stops recording the current
channel.
Record All Channels The button is available when you press the Enable
Record button. Starts / stops recording all channels.
Enable PTZ Activates PTZ controls.
Focus Far / Focus
Near
The two buttons are available when you press the Enable
PTZ button. Use the two buttons to focus in or out the
image.
PTZ Preset The button is available when you press the Enable PTZ
button. It allows you to remotely move the PTZ to the
preset points.
Auto Focus The button is available when you press the Enable PTZ
button.
Enable I/O Activates the output controls.
Snapshot Takes a snapshot of image.