CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 134)

116
2.5.3 Automatic Setup
Using Automatic Setup, you can add all GeoVision and third-party IP cameras within an IP address
range.
1. Click Automatic Setup. A dialog box appears.
Figure 2-6
2. Type a Starting IP address and specify the number of addresses in the IP pool to include. In
the case of the figure above, IP devices using IP address between 192.168.0.1 and 192.168.0.10
will be added.
3. Click OK.
GV-System will automatically try to establish connection with IP devices within the defined IP range.
The username and password are set to admin by default. If the camera does not use the default
settings, the status will be displayed as “Connecting.” To change the login settings, right-click the
camera and click Disconnect Camera. Right-click the camera again and click Change Setting to
modify the username and password.