CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 600)

582
11.11.4 Controlling a WebCam Server
To disconnect a login user or set the bandwidth limit for a user, right-click the user to have these
options:
Figure 11-63
„ Kick: Disconnects the user from the WebCam server.
„ Block IP: Prohibits the IP address from connecting to the WebCam server. To use the function,
the Enable IP Black List option (Figure 11-66) must be selected first.
„ Bandwidth Setup: Select By Username to specify a bandwidth limit for the user, or select By IP
to limit the bandwidth used by the IP address. A setup dialog box will appear. In this example, an
IP address is selected for bandwidth limit setup. Select Bandwidth Setup, specify a bandwidth
limit, and then click OK.
Figure 11-64