Teledyne 6200E - Sulfides Analyzer - Manual (Page 57)

Model 6200E Instruction Manual Optional Hardware and Software
M6200E Rev: A1 57
Once the degree of dilution is known, this feature allows the user to add an appropriate scaling
factor to the analyzer’s CO
2
concentration calculation so that the measurement range and
concentration values displayed on the instrument’s front panel display and reported via the analog
and serial outputs reflect the undiluted values.
Contact Teledyne Analytical Instruments Customer Service personnel for information on activating
this feature.
Instructions for using the dilution ratio option can be found in Section 6.7.8.
User Notes: