Safety messages – Teledyne 6200E - Sulfides Analyzer User Manual
Page 2
Model 6200E Instruction Manual
2
M6200E Rev: A1
SAFETY MESSAGES
Your safety and the safety of others is very important. We have provided many important safety
messages in this manual. Please read these messages carefully.
A safety message alerts you to potential hazards that could hurt you or others. Each safety
message is associated with a safety alert symbol. These symbols are found in the manual and
inside the instrument. The definition of these symbols is described below:
GENERAL SAFETY HAZARD: Refer to the instructions for details on the
specific hazard.
CAUTION: Hot Surface Warning
CAUTION: Electrical Shock Hazard
TECHNICIAN SYMBOL: All operations marked with this symbol are to
be performed by qualified maintenance personnel only.
CAUTION
The analyzer should only be used for the purpose and in the manner described in this
manual. If you use the analyzer in a manner other than that for which it was intended,
unpredictable behavior could ensue with possible hazardous consequences.
NOTE
Technical Assistance regarding the use and maintenance of the Model
6200E
UV
Fluorescence H
2
S Analyzer or any other Teledyne Analytical Instruments product can be
obtained by:
Contacting Teledyne Analytical Instruments’ Customer Service Department at 800-324-
5190
or
Via the internet at