Teledyne 6200E - Sulfides Analyzer - Manual (Page 130)

Operating Instructions Model 6200E Instruction Manual
130 M6200E Rev: A1
To configure the parameters for a specific data parameter, press:
FROM THE EDIT DATA PARAMETER MENU
(see previous section)
SETUP X.X 0) PARAM=S2SCN1, MODE=AVG
PREV NEXT INS DEL EDIT EXIT
SETUP X.X PARAMETERS:S2SCN1
SET> EDIT EXIT
SETUP X.X SAMPLE MODE:AVG
EDIT EXIT
SETUP X.X PARAMETERS: S2SCN1
PREV NEXT ENTR EXIT
Cycle through list of available
Parameters.
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
SETUP X.X SAMPLE MODE: INST
INST AVG MIN MAX EXIT
Press the key for the desired mode
SETUP X.X PRECISION: 1
EDIT EXIT
SETUP X.X PRECISION: 1
1 EXIT
Set for 0-4
SETUP X.X STORE NUM. SAMPLES: OFF
EDIT EXIT
SETUP X.X STORE NUM. SAMPLES: OFF
OFF ENTR EXIT
Turn ON or OFF
Returns to
previous
Functions
6.11.2.5. Sample Period and Report Period
The iDAS defines two principal time periods by which sample readings are taken and permanently
recorded:
• SAMPLE PERIOD: Determines how often iDAS temporarily records a sample reading of
the parameter in volatile memory. The SAMPLE PERIOD is set to one minute by default
and generally cannot be accessed from the standard iDAS front panel menu, but is available
via the instruments communication ports by using APICOM or the analyzer’s standard serial
data protocol.