Teledyne 6200E - Sulfides Analyzer - Manual (Page 147)

Model 6200E Instruction Manual Operating Instructions
M6200E Rev: A1 147
o
LOGOFF SUCCESSFUL - Connection terminated successfully
To log on to the model 6200E analyzer with SECURITY MODE feature enabled, type:
LOGON 940331
940331 is the default password. To change the default password, use the variable RS232_PASS
issued as follows:
V RS232_PASS=NNNNNN
Where N is any numeral between 0 and 9.
6.12.2.8. APICOM Remote Control Program
APICOM is an easy-to-use, yet powerful interface program that allows to access and control any of
Teledyne Analytical Instruments’ main line of ambient and stack-gas instruments from a remote
connection through direct cable, modem or Ethernet. Running APICOM, a user can:
Establish a link from a remote location to the M6200E through direct cable connection via RS-232
modem or Ethernet.
View the instrument’s front panel and remotely access all functions that could be accessed when
standing in front of the instrument.
Remotely edit system parameters and set points.
Download, view, graph and save data for predictive diagnostics or data analysis.
Retrieve, view, edit, save and upload iDAS configurations.
Check on system parameters for trouble-shooting and quality control.
APICOM is very helpful for initial setup, data analysis, maintenance and trouble-shooting. Figure 6-
16 shows an example of APICOM being used to remotely configuration the instruments iDAS
feature. Figure 6-20 shows examples of APICOM’s main interface, which emulates the look and
functionality of the instruments actual front panel