beautypg.com

Ce mark compliance, Emissions compliance, Safety compliance – Teledyne 6200E - Sulfides Analyzer User Manual

Page 19: Warranty

background image

Model 6200E Instruction Manual

Specifications, Approvals and Warranty

M6200E Rev: A1

19

2.3. CE Mark Compliance

2.3.1. Emissions Compliance

The Teledyne Analytical Instruments UV Fluorescence H

2

S Analyzer M6200E was tested and found

to be fully compliant with:

EN61326 (1997 w/A1: 98) Class A, FCC Part 15 Subpart B Section 15.107 Class A, ICES-003

Class A (ANSI C63.4 1992) & AS/NZS 3548 (w/A1 & A2; 97) Class A.

Tested on 07-21-03, 2003 at CKC Laboratories, Inc., Report Number CE03-021.

2.3.2. Safety Compliance

The Teledyne Analytical Instrument’s UV Fluorescence H

2

S Analyzer M6200E was tested and found

to be fully compliant with:

IEC 61010-1:90 + A1:92 + A2:95,

Tested on 04-04-03, 2003 at CKC Laboratories, Inc., Report Number WO 80146.

2.4. Warranty

Warranty Policy (02024)

Prior to shipment, Teledyne Analytical Instruments Incorporated equipment is thoroughly

inspected and tested. Should equipment failure occur, Teledyne Analytical Instruments
Incorporated assures its customers that prompt service and support will be available.

Coverage

After the warranty period and throughout the equipment lifetime, Teledyne Analytical Instruments

Incorporated stands ready to provide on-site or in-plant service at reasonable rates similar to

those of other manufacturers in the industry. All maintenance and the first level of field

troubleshooting is to be performed by the customer.

Non-TAI Manufactured Equipment

Equipment provided but not manufactured by Teledyne Analytical Instruments Incorporated is

warranted and will be repaired to the extent and according to the current terms and conditions of

the respective equipment manufacturers warranty.

General

Teledyne Analytical Instruments Incorporated warrants each product manufactured by Teledyne

Analytical Instruments Incorporated to be free from defects in material and workmanship under

normal use and service for a period of one year from the date of delivery. All replacement parts

and repairs are warranted for 90 days after the purchase.

If a product fails to conform to its specifications within the warranty period, Teledyne Analytical

Instruments Incorporated shall correct such defect by, in Teledyne Analytical Instruments’

discretion, repairing or replacing such defective product or refunding the purchase price of such

product.