Teledyne 6200E - Sulfides Analyzer User Manual
Page 289
Model 6200E Instruction Manual
APPENDIX A-2: Setup Variables For Serial I/O, Revision A.1
M6200E Rev A.1
289
SETUP VARIABLE
NUMERIC
UNITS
DEFAULT
VALUE
VALUE RANGE
DESCRIPTION
CLOCK_FORMAT
— “TIME=
%H:%M:
%S”
Any character in
the allowed
character set. Up
to 100 characters
long.
Time-of-day clock format flags.
Enclose value in double quotes (“)
when setting from the RS-232
interface.
“%a” = Abbreviated weekday name.
“%b” = Abbreviated month name.
“%d” = Day of month as decimal
number (01 – 31).
“%H” = Hour in 24-hour format (00
– 23).
“%I” = Hour in 12-hour format (01 –
12).
“%j” = Day of year as decimal
number (001 – 366).
“%m” = Month as decimal number
(01 – 12).
“%M” = Minute as decimal number
(00 – 59).
“%p” = A.M./P.M. indicator for 12-
hour clock.
“%S” = Second as decimal number
(00 – 59).
“%w” = Weekday as decimal number
(0 – 6; Sunday is 0).
“%y” = Year without century, as
decimal number (00 – 99).
“%Y” = Year with century, as
decimal number.
“%%” = Percent sign.
FACTORY_OPT
BitFlag
0
0–65535
Factory option flags. Add values to
combine flags.
1 = enable dilution factor
2 = zero/span valves installed
4 = IZS installed (implies zero/span
valves installed)
16 = display units in concentration
field
32 = enable software-controlled
maintenance mode
128 = enable switch-controlled
maintenance mode
2048 = enable Internet option
5
Must power-cycle instrument for these options to fully take effect.