Paradyne 6800 - Manual (Page 97)

COMSPHERE 6800 Series Network Management System
3-16 January 1997 6800-A2-GN22-30
Table 3-4 shows the correct settings for the first five DIP switches and indicates the function
performed by each switch.
Table 3-4
Serial Interface Card Settings Switches 1—5
Switch Setting Function
1 ON XON/XOFF protocol
2 OFF 8-bit data length
3 OFF Parity OFF
4 OFF Parity ODD
5 OFF 1 stop bit
Switches 6 through 8 are used to set the communications speed of the printer. Table 3-5 shows the
correct switch setting for each speed.
Table 3-5
Serial Interface Card Settings Switches 6—8
Speed
Switch
Speed
6 7 8
9600 ON ON OFF
4800 ON OFF ON
2400 ON OFF OFF
1200 OFF ON ON
6. Replace the card cover, screwing the retaining bolt in and locking the paper release lever.