Paradyne 6800 - Manual (Page 171)

COMSPHERE 6800 Series Network Management System
5-10 January 1997 6800-A2-GN22-30
8. The following message appears:
Enter your activation key or enter q to quit:
TYPE: the UNIX activation key (found on the Serial Number card attached to the
Release Notes)
PRESS: Enter
NOTE
If either the serial number or activation key is entered incorrectly, the
system will prompt you again for the information. If you quit at either
of these steps, you will have to start the installation process from the
beginning.
Once the correct serial number and activation key are entered, the system completes the
base UNIX installation and displays the following message:
Choose Password
You can choose whether you pick a password, or have the system create one for you.
1. Pick a password
2. Pronounceable password will be generated for you
Enter choice (default is 1):
TYPE: 1
PRESS: Enter
9. The system prompts:
New password:
TYPE: your chosen password
PRESS: Enter
10. The system prompts:
Re-enter new password:
TYPE: your chosen password again
PRESS: Enter