Paradyne 6800 - Manual (Page 207)

COMSPHERE 6800 Series Network Management System
5-46 January 1997 6800-A2-GN22-30
Enter your activation key or enter q to quit
TYPE: activation key
PRESS: Enter
The system prompts:
Enter the system node name or enter return to use [unix].
NOTE
To use the default network configuration, you must enter uip-1 as
the system node name and 1.1.1.2 as the internet address.
TYPE: system node name
PRESS: Enter
The following messages appear:
TCP/IP Configuration Complete.
Altos TCP/IP Runtime installation complete.
The system displays the currently configured chains and then the following menu:
Available options:
1. Add a chain
2. Remove a chain
3. Reconfigure an element in a chain
q. Quit
Select option:
TYPE: 1
PRESS: Enter
The system displays the top-level chain descriptions and prompt:
Select top level of chain to Add or q to quit:
TYPE: 1 (for altos_tcp)
PRESS: Enter
The system prompts:
Select next level of chain to Add or q to quit:
TYPE: 5 (for en0)
PRESS: Enter
The system prompts for confirmation:
Add chain altos_tcp -> en0 (y/n):
TYPE: y
PRESS: Enter