Paradyne 6800 - Manual (Page 218)

Loading and Restoring Software
5-57 6800-A2-GN22-30 January 1997
NOTE
Consult your System Administrator to determine whether to specify
a net mask, a broadcast address, or DOMAIN name different from
the default. Choose the default when using the basic network
configuration as described in the Network Pre-Installation
Preparation section.
PRESS: Enter
The system prompts:
Does the interface use a broadcast address of all 1’s? (y/n) (default:y):
PRESS: Enter
The system prompts:
Enter the broadcast address for this interface (default: nnn.nnn.255.255):
PRESS: Enter
The system prompts for verification of the previously entered values:
Interface Address:
Netmask:
Broadcast Address:
Are these values correct? (y/n):
If the values are not correct, respond n. The system again requests entry of the Internet
Address. If the values are correct,
TYPE: y
PRESS: Enter
The system prompts:
Enter DOMAIN name for “node name” or enter return to use [net.COM]:
Where: node name is the name of the system on which you are installing.
PRESS: Enter
The system prompts:
99 Pseudo ttys are currently configured; do you want to:
1. Add Pseudo tty
2. Remove Pseudo tty
Select an option of enter q to quit [q]:
TYPE: q
PRESS: Enter
The system displays:
TCP/IP Configuration Complete