Paradyne 6800 User Manual
Page 197
COMSPHERE 6800 Series Network Management System
5-36
January 1997
6800-A2-GN22-30
NOTE
Messages indicating that the link kit is only partially installed may be
ignored. Press Enter if required to by such messages.
7. The system asks you to insert the requested volume. Do not remove the Token Ring
Host/UIP Application floppy; leave it in the floppy disk drive and
PRESS: Enter
8. When all files are read, the following screen appears:
Executing Proteon ProNet-4/16 LLI RapiDriver Disk Init Script
Installing the pro driver
After installing the Proteon ProNet-4/16 LLI RapiDriver Disk, please use
netconfig or mkdev
Press return to continue . . .
PRESS: Enter
9. The system prompts:
Press any key to continue . . .
PRESS: Enter
10. The Products Currently Installed menu appears:
TYPE: q
11. Using the
↓↑
keys, select yes to exit the custom install procedure.
12. Remove the floppy disk from the drive, remain in system maintenance mode, and continue
the installation of the Token Ring feature with the section, Configuring the Token Ring
Network on the Host/UIP.
Configuring the Token Ring Network on the 5000 Host/UIP
To configure the network for the installed Token Ring card on an Altos 5000 processor, perform
the following steps:
1. At the UNIX prompt:
TYPE: netconfig
PRESS: Enter