Paradyne 6800 - Manual (Page 196)

Loading and Restoring Software
5-35 6800-A2-GN22-30 January 1997
TYPE: cd /
PRESS: Enter
TYPE: shutdown -g0 -y -i6
PRESS: Enter
The command will shutdown and reboot the system.
Installing Token Ring Software on the NMS Host/UIP
The Token Ring package is an optional feature that can only be installed on an Altos 5000
platform. Do not proceed with this procedure unless the Token Ring LAN feature was purchased.
To install the Token Ring software on the NMS host processor or UIP, perform the following steps:
1. At the # prompt, initiate a shutdown and automatic reboot by entering the following
commands:
TYPE: cd /
PRESS: Enter
TYPE: shutdown -g0 -y -i6
PRESS: Enter
The system reboots; at the following message:
Type (CONTROL-d) to proceed with normal startup
(or give root password to enter system maintenance):
TYPE: root password
PRESS: Enter
2. When the UNIX root prompt (#) appears:
TYPE: custom
PRESS: Enter
3. The custom installation menu displaying “Products Currently Installed” appears. The
command Install should be highlighted at the top of the screen. If it is not, use the
↓↑
keys
to highlight it and
PRESS: Enter
4. The product selection menu appears. Using the
↓↑
keys, select A New Product and
PRESS: Enter
5. The install option menu appears. Select Entire Product and
PRESS: Enter
6. Insert the Token Ring Host/UIP Application floppy into the floppy drive when instructed to
by the custom installation procedure and
PRESS: Enter