Paradyne 6800 User Manual

Page 189

Text mode
Original mode

COMSPHERE 6800 Series Network Management System

5-28

January 1997

6800-A2-GN22-30

Initializing the NMS Database

CAUTION

This action destroys the database. Do not initialize the
database unless this is a first-time installation.

To install the 4.2 Release for the first time, you must create and initialize the NMS database. To do
this, perform the following steps:

1. TYPE: root

NOTE

You cannot initialize the database from any other login.

PRESS: Enter

TYPE: root password

PRESS: Enter

2. Once you are logged in,

TYPE: cd /usr/nms/adm

PRESS: Enter

Then,

TYPE: ./installDb

PRESS: Enter

NOTE

Do not reboot the system after executing InstallDb. The initialization
parameters will be lost. Rebooting should be done after the 6800
has been started up for the first time.