Paradyne 6800 - Manual (Page 137)

Connecting the Components
4-33 6800-A2-GN22-30 January 1997
Connecting an External Systems Port
To connect a Supervisory NAP on the 74x multiplexer to the external systems port on the host
processor, you will need the following materials:
•
035-0153-0031 cable
•
002-0039-0031 connector
To establish the connection, perform the following steps:
1. Connect the 035-0153-0031 cable to the IPC-1600 port that is configured as the external
systems port.
2. Connect the other end of the 035-0153-0031 cable to a 002-0039-0031 connector.
3. Connect the 002-0039-0031 connector to the NAP on the 74x multiplexer that has been
configured as the Supervisory NAP.
Connecting an Event or Command Port
To connect an Event Datagram NAP on the 74x multiplexer to the event or command port on the
host processor, you will need the following materials:
•
Two 035-0153-0031 cables
•
Two 002-0021-0031 connectors
To establish the connection, perform the following steps:
1. Connect 035-0153-0031 cables to the IPC-1600 ports that are configured as the event port
and the command port.
2. Connect the other end of each 035-0153-0031 cable to the 002-0021-0031 connector.
3. Connect one 002-0021-0031 connector to the NAP on the 74x multiplexer configured as
the command port.
4. Connect the other 002-0021-0031 connector to the NAP on the 74x multiplexer configured
as the event port.
Connecting the Current Version 719 NETWORKER
The 719 NETWORKER can connect to the host processor one of two ways, depending on the
version of the firmware. To determine the firmware configuration, connect a VT100 terminal to
Channel 0 and power up. If the banner displays ACCULINK 3.K or higher, the NETWORKER
can support all three ports. If the banner displays an earlier version number, the 719 networker
cannot support the command port. In this case, a 74x multiplexer must be used with the 719
Networker.
Connecting an External Systems Port
To connect the 719 NETWORKER, you will need the following materials:
•
035-0153-0031 cable
•
002-0039-0031 connector