Paradyne 6800 - Manual (Page 123)

Connecting the Components
4-19 6800-A2-GN22-30 January 1997
Figure 4-12. Printer Connections
Connecting a Local System Printer
The local system printer can be either the Fujitsu DL5600 or DL3400/DL3600. Follow the
appropriate procedure below.
DL3400/DL3600
The DL3400/DL3600 is a parallel printer that can only be connected to the LPT1 port on the host
processor.
1. Connect the 25-pin connector of the 035-0155-0031 cable to the LPT1 parallel port on the
host processor. Secure the connection with the captive screws.
2. Connect the other end of the 035-0155-0031 cable to the matching Centronics port on the
DL3400. Use the spring clips to secure the connection.