Paradyne 6800 - Manual (Page 214)

Loading and Restoring Software
5-53 6800-A2-GN22-30 January 1997
11. Create a password for the uip login. You can choose your own password for the login or let
the installation program generate one for you. The system default is startmenu.
PRESS: Enter
A message describing acceptable passwords appears, followed by the prompt for the new
password. To enter your own password,
TYPE: the password you want
PRESS: Enter
TYPE: the same password again
PRESS: Enter
A message then appears telling you that the preinstallation phase of the installation is
complete.
12. When the preinstallation is completed, you are ready to begin the actual installation of UIP
software. The installation program prompts you to install the cartridge tape containing the
UIP files. The required floppy and cartridge tape have previously been inserted into the
drives.
TYPE: install
PRESS: Enter
The installation takes about five minutes. As the installation proceeds, a series of status
messages appear indicating specific installation activity that is taking place.
After the message
Building NMS fonts...
appears, you are prompted as follows:
What is the name of the NMS HOST machine?
TYPE: the name of the NMS host processor (unix is the default).
PRESS: Enter
The status messages indicate that the installation is proceeding and that the operating
system is being rebuilt.
13. The following message appears:
Do you wish to have the screen-saver capability (y/n) [n]
TYPE: y (for an automatic time-out of the CRT)
PRESS: Enter
or
TYPE: n (for a continuous display)
PRESS: Enter