Paradyne 6800 - Manual (Page 198)

Loading and Restoring Software
5-37 6800-A2-GN22-30 January 1997
2. The currently configured chains and the following options menu appears:
Available options:
1. Add a chain
2. Remove a chain
3. Reconfigure an element in a chain
q. Quit
Select option:
TYPE: 2
PRESS: Enter
3. The list of the currently configured chains reappears; the chain altos_tcp–>en0 appears in
the list for the existing Ethernet driver in the TCP/IP kernel configuration.
TYPE: 2
PRESS: Enter
4. The system prompts for confirmation:
Remove altos_tcp
−
>en0 (y/n):
TYPE: y
PRESS: Enter
5. The options menu from Step 2 appears again
TYPE: 1
PRESS: Enter
6. The system displays the top-level chain descriptions and prompts:
Select top level of chain to Add or q to quit:
TYPE: 1
PRESS: Enter
7. The system prompts:
Select next level of chain to Add or q to quit:
TYPE: 17 (for pro0 for the Proteon 4/16 Token Ring Rapidriver, board 0)
PRESS: Enter
8. The system prompts for confirmation:
Add chain altos_tcp-pro0 (y/n):
TYPE: y
PRESS: Enter