Paradyne 6800 - Manual (Page 284)

Performing Migration
7-13 6800-A2-GN22-30 January 1997
The system performs database error checking and then starts the NMS. When the start-up
is complete, the following message appears:
The AT&T Paradyne NMS system has been successfully started.
Press RETURN to continue
23. To continue,
PRESS: Enter
The Release 4.2 6800 Series NMS menu appears.
24. To return to the Console Login: prompt,
TYPE: 11
PRESS: Enter
25. At the Console Login: prompt,
TYPE: nms
PRESS: Enter
TYPE: The full-feature workstation password (the default is no password; just press
Enter)
PRESS: Enter
The NMS application is brought up and the NMS login window appears.
Checking the Migrated Database
Following NMS start-up the integrity of the migrated data should be verified. The following
procedures may be executed for that purpose.
Data Integrity Verification
To verify the integrity of the migrated data, perform the following steps.
1. Bring up the System Management window and execute the Create Network Map (crnm)
command. Refer to the COMSPHERE 6800 Series Network Management System Core
Command Reference Manual for details on all commands.
2. Following completion of the Create Network Map (crnm) command, bring up the
network map window and inspect the network map visually.
NOTE
Circuit names and device addresses are not displayed on the
Release 4.2 network map. Device names and site names are
displayed.