Paradyne 6800 - Manual (Page 39)

COMSPHERE 6800 Series Network Management System
2-16 January 1997 6800-A2-GN22-30
491-13843
Bracket Holding
Screw
Base I/O Boards
VGA Controller
DCP/MUXi
IPC 1600
Memory Controller
Memory Card
Figure 2-9. System 5000 — Expansion Slots
4. Each EISA slot has a connector with two rows of pins. Slide the circuit card in the guides
so that its connector fits into the EISA connector down to the second row of pins.
5. Push once to engage the first row of pins and then again to engage the second row.
6. Repeat this procedure for each circuit card you intend to install.
7. When you have installed all circuit cards, secure each card’s metal bracket to the chassis.
8. When you have installed all circuit cards, you must run the EISA Configuration Utility. See
the section, EISA Configuration Utility, for instructions.