Paradyne 6800 - Manual (Page 153)

Connecting the Components
4-49 6800-A2-GN22-30 January 1997
To establish the file export connection, perform the following steps at the host processor end:
1. Connect the grounded end of the 035-0153-0031 cable to the IPC-1600 port that is
configured for file export.
2. Connect the other end of the 035-0153-0031 cable to the 002-0039-031 connector.
3. Connect the 002-0039-0031 connector to the local DCE device.
To establish the UAI connection, perform the following steps at the host processor end:
1. Connect the grounded end of the 035-0153-0031 cable to the IPC-1600 port that is
configured for the UAI.
2. Connect the other end of the 035-0153-0031 cable to the 002-0039-031 connector.
3. Connect the 002-0039-0031 connector to the local DCE device.
To establish the ACCUMASTER cut-through connection, perform the following steps at the host
processor end.
1. Connect the grounded end of the 035-0153-0031 cable to the IPC-1600 port that is
configured for remote terminal.
2. Connect the other end of the 035-0153-0031 cable to the 002-0039-031 connector.
3. Connect the 002-0039-0031 connector to the local DCE device.
Perform the following steps to connect the three remote DCE devices to the ACCUMASTER
Integrator.
1. Connect one end of the 835-5783-0011 cable to the appropriate port of the
ACCUMASTER Integrator.
2. Connect the 835-5783-0011 cable to the remote DCE device.