Paradyne 6800 - Manual (Page 88)

Preparing the Printers
3-7 6800-A2-GN22-30 January 1997
QUALITY :LETTER
FONT :COUR 10
CHR-WIDE :NORMAL
CHR-HIGH :NORMAL
CHAR SPC :10CPI
LINE SPC :6LPI
EMULATE :DPL24C
ATTRIB :NONE
PAGE LG :11INCH
COLOR :AUTOSEL
LEFT-END :1COLM
TOP-MRGN :1LINE
LANGUGE :USA
CHAR-SET :SET2
GRAPH-LF :IBM-GPH
PERFRATN :NO-SKIP
WIDTH :13.6INCH
ZEROFONT :NO-SLASH
DC3-CODE :ENABLE
CR-CODE :CR-ONLY
LF-CODE :LF&CR
RGHTEND :WRAP
5. When you have changed all necessary MENU1 settings, you are ready to access the second
SETUP function — HARDWARE. To do this, press the MODE button until the cursor is
positioned next to HARDWARE.
The HARDWARE function consists of six individual printer settings. These settings are shown
below, along with the correct value for each setting.
PPR-OUT :DETECT
PRNT-DIR :BI-DIR
BUZZER :ON
WORD-LG :8-BIT
BUFFER :8KBYTE
FEEDER :NONE