Paradyne 6800 - Manual (Page 89)

COMSPHERE 6800 Series Network Management System
3-8 January 1997 6800-A2-GN22-30
6. Follow the procedure described in Step 4 to print the HARDWARE settings and compare
them to the correct settings shown above. If any of the settings are incorrect, follow the
procedure in Step 4 to change them.
7. Once the MENU1 and HARDWARE settings are correct, you must save them (if you do
not save them, your selections will be lost when the printer’s power is turned off). To do
this,
a. Press the ONLINE button to return the main function menu.
b. Press the MODE button until the cursor is positioned next to SAVE/END.
c. Press the FF button to save your selections and exit the SETUP mode.