Paradyne 6800 - Manual (Page 227)

COMSPHERE 6800 Series Network Management System
5-66 January 1997 6800-A2-GN22-30
Select connector type
1. Thin net
2. External Transceiver (thick net)
Enter selection or ‘q’ to Quit [1]:
TYPE: 1
PRESS: Enter
Enter I/O Address in hex [300]:
TYPE: 300
PRESS: Enter
NOTE
If you are using basic network configuration, check the IP address in
Table 5-1. Otherwise, consult with your System Administrator to
ensure entering the correct IP address.
Enter this system’s IP address:
TYPE: IP address in format “xxx.xxx.xxx.xxx” where xxx is a number
from 1 to 255 inclusive
PRESS: Enter
NOTE
Consult with Network Administrator to verify correct subnet mask.
Enter a subnet mask[255.0.0.0]
PRESS: Enter
22. The system prompts:
Would you like to specify your gateway entries now (y/n/q)? [n]:
PRESS: Enter
Would you like to add a name server (y/n)? [n]:
PRESS: Enter
If a HOSTS file does not exist, please specify the path where it will reside:
(Default=C:\/XONE\/HOSTS)
PRESS: Enter