Paradyne 6800 - Manual (Page 194)

Loading and Restoring Software
5-33 6800-A2-GN22-30 January 1997
The system prompts for confirmation:
Add chain altos_tcp -> aaa (y/n):
TYPE: y
PRESS: Enter
The system displays status messages and then request:
Please enter the following information in order to configure en0
Enter the internet address of this interface:
TYPE: internet address
in the form nnn.nnn.nnn.nnn
Where: nnn is an integer from 1 to 255
PRESS: Enter
The system prompts:
Enter the netmask for this interface (default: 255.255.0.0):
NOTE
Consult your System Administrator to determine whether to specify
a net mask, a broadcast address, or DOMAIN name different from
the default. Choose the default when using the basic network
configuration as described in the
Network Pre-Installation
Preparation section.
PRESS: Enter
The system prompts:
Does the interface use a broadcast address of all 1’s? (y/n) (default:y):
PRESS: Enter
The system prompts:
Enter the broadcast address for this interface (default: nnn.nnn.255.255):
PRESS: Enter
The system asks for verification of the previously entered values:
Interface Address:
Netmask:
Broadcast Address:
Are these values correct? (y/n):