Paradyne 6800 - Manual (Page 232)

Loading and Restoring Software
5-71 6800-A2-GN22-30 January 1997
Do you wish to install the DecWindows fonts: (y/n)? [n]
TYPE: y
PRESS: Enter
Do you wish to install the TGRAF fonts: (y/n)? [n]
TYPE: y
PRESS: Enter
Do you wish to install the Kanji fonts: (y/n)? [n]
TYPE: y
PRESS: Enter
Make sure the X-ONE disk labeled ‘Install’ is in the floppy drive
Press ENTER to continue or ‘q’ to Quit
PRESS: Enter
6. After some time marked by a line of dots on the screen, the system prompts:
Insert the X-ONE disk Labeled ‘Fonts Disk 1’
Press ENTER to continue or ‘q’ to Quit
Remove X-One Install disk, insert requested disk, and
PRESS: Enter
7. After some time marked by a line of dots on the screen, the system prompts:
Insert the X-ONE disk Labeled ‘Fonts Disk 2’
Press ENTER to continue or ‘q’ to Quit
Remove Fonts Disk 1, insert requested disk, and
PRESS: Enter
8. After another period also marked by the line of dots on the screen, the following messages
appear:
All files successfully installed
The following should be placed in your autoexec.bat file
SET XONEDIR=C:\XONE
SET DOS4G=quiet
Would you like X-One to add this to your autoexec.bat file (y/n)? [y]:
PRESS: Enter
9. The system responds:
Ready to execute setup
Press any key to continue
PRESS: Enter