Paradyne 6800 - Manual (Page 199)

COMSPHERE 6800 Series Network Management System
5-38 January 1997 6800-A2-GN22-30
9. A menu of Proteon board types appears with p199x as the default.
The Rapidriver supports the following Proteon ProNet-4/16 boards:
On ISA machines: p139x boards (p1390, p1391,p1392)
On MC machines: p189x boards (p1890, p1892)
On EISA machines: p1990 board plus the ISA boards
Enter board family (p139x p199x) [p199x] or \‘q’ to quit:
PRESS: Enter
10. The system prompts for the card slot number.
The following p199x boards have been found in your machine:
Slot Model Description
6 p1990 base=6000, irq=10, cable: utp, ring speed: 16
Current pro driver slot assignment: none
Enter slot number (6) or ‘q’ to quit:
TYPE: 6 (the slot number where the NIC is physically installed)
PRESS: Enter
11. The system prompts:
Restrict OSI and TCPIP broadcasts to the local ring? (y/n) or ‘q’ to quit:
PRESS: Enter
NOTE
Consult your Network Administrator to determine if values other
than the default are to be entered for the Internet address, netmask,
broadcast address, and DOMAIN name. The following steps
assume that the defaults are used except where otherwise required.
12. The system prompts:
Please enter the following information in order to configure pro0
Enter the internet address of this interface:
TYPE: internet address in the form nnn.nnn.nnn.nnn
Where: nnn is a number from 1 to 255.
PRESS: Enter
13. The system prompts:
Enter the netmask for this interface (default: 255.255.0.0):
PRESS: Enter