Paradyne 6800 User Manual
Page 92
Preparing the Printers
3-11
6800-A2-GN22-30
January 1997
4. Upon pressing the FF button, the first MENU1 setting will print along with its optional
values. The default value will have a short line printed beneath the left-hand portion of the
value. Press the MODE button to move the red cursor under the various values to be
selected. Press the FF button to select the value to be used for that particular setting. The
printer will underline that value and print the next setting and its values.
5. When “< ==END== >” is printed, you are ready to exit from changing the MENU1
settings. Press the ONLINE button at this time to exit and return to the Function Menu.
6. When you have checked or changed all the MENU1 settings, select the HARDWRE
function from the Function Menu by pressing the MODE button until the red cursor is
positioned under the printed HARDWRE tag. Then select that function by pressing the FF
button. Table 3-2 shows the settings and correct values for the HARDWRE function.
7. When “< ==END== >” is printed, you are ready to exit from changing the HARDWRE
settings. Press the ONLINE button at this time to exit and return to the Function Menu.
8. To exit SETUP mode, position the red cursor under SAVE&END and press the FF button.
Table 3-2
DL3600 — HARDWARE Settings
Setting
Correct Value
DETECT
BI-DIR
ON
8 BIT
8KBYTE
REAR