Paradyne 6800 - Manual (Page 300)

Performing Migration
7-29 6800-A2-GN22-30 January 1997
The original menu (Figure 7-6) appears with the selected type in parentheses after
Option 3:
493-13960b
AT&T Paradyne NMS Parameters:
1 Initialize ONLINE Partition y
2 Initialize NMS Database y
3 Include Migration Data (r3) y
4 Rebuild NMS Database Indices n
cont To Continue
quit To abort
If you wish to modify the NMS parameters
Enter number (1,2,3,4,cont or quit):
Figure 7-6. Original Menu Showing Selected Type (r3)
12. To rebuild the NMS database indices,
TYPE: 4
PRESS: Enter
13. To continue,
TYPE: y
PRESS: Enter
14. To continue,
TYPE: c
PRESS: Enter
The following message appears:
xxxx Data Base Initialization xxxx
followed by several console messages indicating the initialization of the INFORMIX
OnLine. Once completed, the following message appears:
xxxx Data Base Initialization Completed xxxx
xxxxxxxxxxxxxxxxStarting Database migrationxxxxxxxxxxxx
The database restore consists of files/directories used with the
INFORMIX database and the INFORMIX database itself.
To perform a database restore, the NMS system must not be running.
Checking NMS system, please wait ...
Please insert tape labeled ’Database Files/Directories Backup’.
Type \‘c’ to continue or \‘q’ to quit and then press Enter.