Paradyne 6800 - Manual (Page 147)

Connecting the Components
4-43 6800-A2-GN22-30 January 1997
Netview/PC
Alerts can be exported to the NetView PC. If this option is chosen, your system cannot be
configured with an alert log printer. The diagram in Figure 4-21 illustrates the connection.
You can connect a NetView/PC either locally or remotely. The following sections explain.
Connecting Locally
To connect to a local NetView/PC, you will need the following materials:
•
035-0153-0031 cable
•
002-0052-0031 connector
To establish the connection, perform the following steps:
1. Connect the grounded end of the 035-0153-0031 cable to an available port on the IPC-1600
card in the host processor.
2. Connect the other end of the 035-0153-0031 cable to the 002-0052-0031 connector.
3. Connect the 002-0052-0031 connector to the serial port on the NetView/PC.
Figure 4-21. Netview/PC Connection