Paradyne 6800 - Manual (Page 179)

COMSPHERE 6800 Series Network Management System
5-18 January 1997 6800-A2-GN22-30
The system prompts:
New password:
TYPE: your chosen password
PRESS: Enter
The system prompts:
Re-enter new password:
TYPE: your chosen password again
PRESS: Enter
26. The system now rebuilds the kernel and installs devices. As this transpires, the following
message appears:
The UNIX Operating System will now be rebuilt.
This will take a few minutes. Please wait.
Root for this system build is /.
Once the kernel has been rebuilt, the following prompt appears:
Do you want this kernel to boot by default? (y/n):
TYPE: y
PRESS: Enter
27. The system will back up the old UNIX and install the new one. When this is done, the
following message appears:
Do you want the kernel environment rebuilt? (y/n):
TYPE: y
PRESS: Enter
28. The installation process is now complete. The following message appears:
The kernel has been rebuilt. Shutdown and reboot the system.
The installation of the 6800 NMS APPLICATION VOLUME 5 is now complete.
29. Remove the floppy disk and cartridge tape.
30. At the prompt:
TYPE: cd /
PRESS: Enter
If you are loading an Altos 5000 system, go to Step a. If you are loading an Altos 15000
system, go to Step b.
a. For an Altos 5000 system, enter the following command to reboot in multi-user mode:
TYPE: shutdown -g0 -y -i6
PRESS: Enter