Paradyne 6800 - Manual (Page 236)

Loading and Restoring Software
5-75 6800-A2-GN22-30 January 1997
22. The system asks:
Would you like to specify your gateway entries now (y/n/q)? [n]:
PRESS: Enter
Would you like to add a name server (y/n)? [n]:
PRESS: Enter
If a HOSTS file does not exist, please specify the path where it will reside:
(Default=C:\XONE\HOSTS)
PRESS: Enter
23. The system prompts:
Please verify settings
Transport:
Interface:
IP Address:
Subnet mask:
Hosts file path:
Are these settings correct (y/n/q)? [y]
PRESS: Enter
24. If the settings are not correct,
TYPE: n
PRESS: Enter
The system returns to Step 20.
25. If the settings are OK:
PRESS: Enter
26. The system responds:
Xsetup will need to copy the network driver ‘tcpnet.exe’
from the XOne diskette to the C: XONE directory
Insert the disk labeled ‘Install’ in drive A
Press ENTER to continue or ‘q’ to Quit
Insert the diskette labeled Install and
PRESS: Enter
The system displays various messages, including:
file extracted from archive
Press any Key to continue . . .
Xsetup will need to copy some additional files to go with your network files.