Paradyne 6800 - Manual (Page 307)

COMSPHERE 6800 Series Network Management System
7-36 January 1997 6800-A2-GN22-30
6. All user-created NMS databases must be initialized in preparation for migration.
TYPE: 2
PRESS: Enter
to select Initialize NMS Database. The following message appears:
Do you wish to initialize the NMS database? (y/n) [n]:
7. To initialize the NMS database,
TYPE: y
PRESS: Enter
The following message appears:
WARNING: Initializing the NMS database will replace it with default values.
Hit to continue or to quit:
8. To continue with the migration process,
PRESS: Enter
9. The menu shown in Figure 7-8 will appear. If there is a database from Release 4.0 to be
converted to Release 4.2 format,
TYPE: 3
PRESS: Enter
to select Include Migration Data. The following message appears:
Do you wish to include migration data from a previous NMS? (y/n) [n]:
10. To proceed,
TYPE: y
PRESS: Enter
The following message appears:
Enter the previous NMS type (sc, r1, r2, r3, r3.1, r4, r4.1):
11. Enter the appropriate type,
TYPE: r4
PRESS: Enter