Paradyne 6800 - Manual (Page 65)

COMSPHERE 6800 Series Network Management System
2-42 January 1997 6800-A2-GN22-30
Installing Circuit Cards in the System 15000
The System 15000 contains eight EISA expansion slots. Figure 2-22 shows the position of all the
expansion slots within the System 15000 processor chassis. Each card should be installed in a
specific slot. Table 2-5 gives the proper slot assignment for each card.
IPC-1600
First DCP/MUXi
Second DCP/MUXi
ECA Card
Video Card
Slot Cover
Screw
494-14502-01
Figure 2-22. System 15000 — Expansion Slots
To insert the circuit cards into a slot, perform the following steps:
1. Locate the EISA slots inside the System 15000 (see Figure 2-22).
2. Take the first circuit card you intend to install and locate the proper slot for that card (see
Table 2-5).
3. Using a Phillips screwdriver, remove the slot cover screw and the slot cover for the slot in
which you intend to install the card. Save the screw for later. Save the slot cover in case the
card is removed in the future.