beautypg.com

Paradyne 6800 User Manual

Page 30

background image

Preparing the Processors

2-7

6800-A2-GN22-30

January 1997

Preinstallation Checks for the Integral Ethernet Card

The Integral Ethernet Card is installed at the factory but the user should check that the settings on
the card are properly configured.

1. Check the jumper settings on the Ethernet card. Confirm that the 7-pin dip jumper is set

between U7 and U8 to set the card for Thick net transmission (see Figure 2-3).

2. Be sure that the Ethernet card is properly seated in the slot above Slot 1 and the cable is

connected to the J5 and J1 pin clusters.

U7 U8 U9

THICK THIN

J5

J1

493-14255

Figure 2-3. Integral Ethernet Card