Paradyne 6800 - Manual (Page 282)

Performing Migration
7-11 6800-A2-GN22-30 January 1997
12. To continue,
TYPE: y
PRESS: Enter
13. To continue,
TYPE: c
PRESS: Enter
The following message appears:
xxxx Data Base Initialization xxxx
followed by several console messages indicating the initialization of the INFORMIX
OnLine. Once completed, the following message appears:
xxxx Data Base Initialization Completed xxxx
followed by several console messages indicating the start-up of database servers.
Once completed, the following message appears:
Beginning Migration Procedures
Device data will be migrated from the previous NMS
Do you also wish to migrate fault data (y or n)? [y].
14. To transfer historical fault data or to skip fault transfer,
TYPE: y or n
PRESS: Enter
The following message appears:
Enter the previous NMS type (sc300, sc400, 6820r1, 6830r1, restore):
15. Enter the previous NMS type,
TYPE: 6820r1 or 6830r1
PRESS: Enter
The following message appears:
Insert the migration cartridge tape containing the Backup
data you downloaded before upgrading your NMS.
Please enter ‘‘ready’’ when done:
16. Insert the backup cartridge tape into the Release 4.2 6800 NMS host computer. Then,
TYPE: ready
PRESS: Enter
The following message appears:
Data Upload Completed Successfully
You may now remove the cartridge tape. Save it for a backup.
Please enter ‘‘ready’’ when done: