Paradyne 6800 - Manual (Page 185)

COMSPHERE 6800 Series Network Management System
5-24 January 1997 6800-A2-GN22-30
11. Create a password for the nms login. You can choose your own password for the login or
let the installation program generate one for you. The default is startmenu.
PRESS: Enter
The system prompts for a new password. Enter the default or choose a new password.
TYPE: the password you want
PRESS: Enter
TYPE: the same password again
PRESS: Enter
A message then appears telling you that the preinstallation phase of the installation is
complete.
12. At this point, you are ready to begin the actual installation of the Release 4.2 software. The
system displays the following prompt.
Insert the cartridge tape containing the NMS system files.
Type “install” when ready or “q” to quit:
Ignore the request to insert the tape. You have already inserted Volume 6 and Volume 7.
TYPE: install
PRESS: Enter
The installation begins. It will take about ten minutes. As the installation ensues, a series of
status messages appears on your screen indicating the specific installation and
post-installation activity that is currently taking place.
13. After the NMS database summary tables have been created, the installation program will
prompt:
How many UIPs do you have (0, 1, or 2):
TYPE: n
Where: n is the number of UIPs connected to the NMS. The possible values of n are 0, 1,
or 2.
PRESS: Enter
The program prompts for the UIP system name with uip-1 as the default name.
TYPE: the name of the first UIP
PRESS: Enter
The system prompts for confirmation.
TYPE: y
PRESS: Enter
If more than one UIP is to be configured, the following message appears:
Enter the name of UIP2 [uip-2]
TYPE: the name of the second UIP
PRESS: Enter