Paradyne 6800 - Manual (Page 181)

COMSPHERE 6800 Series Network Management System
5-20 January 1997 6800-A2-GN22-30
5. The system prompts for Distribution Floppy Volume 1. Insert the Altos/SCO MPX
Supplement floppy disk in the floppy drive. Use the
↓↑
keys to highlight Continue and
PRESS: Enter
6. The system prompts again for Altos MPX Multiprocessing Floppy Volume 1. The floppy
is already in the drive so you can ignore this prompt. Use the
↓↑
keys to highlight
Continue and
PRESS: Enter
7. The system prompts,
Enter your Altos MPX serial number:
TYPE: your serial number (provided in the Altos MPX software package)
PRESS: Enter
8. The system prompts,
Enter your Altos MPX activation key:
TYPE: your activation key (provided in the Altos MPX software package)
PRESS: Enter
9. The system asks,
Do you wish to create a new kernel now (y/n)?
TYPE: y
PRESS: Enter
PRESS: Enter (to continue)
10. The system will prompt,
Press any key to continue ...
PRESS: Enter
11. Use the
→
/
←
keys to highlight Quit and
PRESS: Enter
12. The system prompts for confirmation of the Quit request. Use the
→
/
←
keys to highlight
Yes and
PRESS: Enter
The system prompts:
Please remove the “Altos/SCO MPX Supplement” floppy, if it’s still in the floppy
drive, and press Enter to continue...
Remove the floppy from the drive and
PRESS: Enter