Paradyne 6800 - Manual (Page 27)

COMSPHERE 6800 Series Network Management System
2-4 January 1997 6800-A2-GN22-30
Circuit Cards
Table 2-1 indicates the location of the standard and optional circuit cards that can be installed in
the host processor.
Table 2-1
Altos 5000 Factory- and Field-Installable Circuit Cards
Slot Card
Memory
Address
IRQ I/O Address Description
1 Base I/O — — 1000 —101F Controls the hard disk(s), floppy disk and
cartridge tape drives.
Integral
Ethernet — 10 1CD0 —1CD2 Optional. Supports connection to User
Interface Processor, Full-Feature
Workstation. Incompatible with Token Ring
card.
2 IPC-900 D2000 — D3FFF 5 2B0 —2BF Optional. Supports ANALYSIS cut-through.
Host only.
3 Video Controller A0000 — C7FFF — 46E8,3B0 —3DF Provides VGA-level graphics.
4 Emulex DCP/
MUXi DC000 — DFFFF — 33C — 33F Provides eight control channels that can be
used to monitor modem and DSU networks.
Host only.
5 Emulex DCP/
MUXi D8000 — DBFFF — 23C — 23F Optional. Provides additional eight control
channels to monitor modem and DSU
networks. Host only.
6 Proteon ProNet
Token Ring
Card — 10 — Optional. Provides support for Token Ring
local area network communication with UIPs
and Full-Feature Workstations. Incompatible
with Integral Ethernet.
7 Emulex
DCP-286i 6A0000 — 6BFFFF 9 27C — 27F Optional. Supports 3270 Terminal Emulation.
Host only.
8 IPC-1600 E10000 — E1FFFF 11 110 — 11F Provides 16 serial ports.