Paradyne 6800 - Manual (Page 14)

COMSPHERE 6800 Series Network Management Systems
xii January 1997 6800-A2-GN22-30
Chapter 8. Running Diagnostics. This chapter provides information on how to use the diagnostic
programs that are shipped with the NMS. These diagnostic programs are used to detect and solve
hardware problems in the Altos System 5000, the Altos System 15000, and in the circuit cards
installed in these systems.
Appendix A. Modem Settings. This appendix describes the settings for hardware and software
configuration of modems connecting remote NMS devices.
Appendix B. Adapter and Cable Identification. This appendix provides information for each
adapter/cable descriptions, usage descriptions and pin information for each cable and adapter
described in this guide.
Appendix C. Maintaining Multiplexers. This appendix provides information on general
troubleshooting procedures, command port failure recovery, event port failure recovery, and
external systems port failure recovery.
Documentation Conventions
The following convention has been used throughout this document.
Typeface
This typeface indicates messages that appear on the screen.
Related Documents
Contact your sales representative to order additional product documentation.
The following documents contain information pertinent to the installation process.
305-910 AT&T Intelligent Ports Card Model 900 (IPC-900) User’s Guide
305-920 AT&T Intelligent Ports Card Model 1600 (IPC-1600) User’s Guide
999-100-292 AT&T 2224-CEO Modem User’s Guide
999-100-432 StarLAN 10 Network PC NAU Installation Guide
6500-A2-GA21 ANALYSIS 6510 Automated Network Management System Reference
Manual
6510-A2-GN31 Network Management Workstation User’s Guide
6800-A2-GB20 COMSPHERE 6800 Series Network Management System
Communications Products Support Configuration Guide
6800-A2-GB21 COMSPHERE 6800 Series Network Management System Multiplexer
Management and Configuration Guide
6800-A2-GB30 COMSPHERE 6800 Series Network Management System Core
Command Reference Manual